cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

ACS 5.x - Performing bulk import of MAC address/IP Address in End Station Filter

1734
Views
29
Helpful
0
Comments

     

     

    Introduction

    ACS 5.x Steps To perform the bulk import of MAC address/IP Address in the End Station Filter

    Configuration

    Note: There is no option given to bulk import the MAC address or IP address in the end station filter.

    Here is the workaround to do the same

    Step 1: Click on the End Station Filter Tab on the ACS

    1.png

    Step 2: Add a Mac address under the MAC address Tab

    (Click on create and check the end station MAC, enter the same then click on Ok)

    2.png

    Step 3: Once the MAC address is added click on the export to file option

    3.png

    Step 4: Now you will see the single MAC address exported on .CSV file

    Now here you can Paste the rest of the MAC and copy the –ANY- in the destination MAC address column, once done save the .CSV file.

    4.png

    Step 5: Now click on replace from file option on ACS and select the saved .CSV file

    5.png

    Step 6: Then click on Start Replace option

    6.png

    Now you can see the MAC address imported on the ACS in end station filter.

    7.png