The Anyconnect Essentials is a license that allows you to connect up to your 'Total VPN Peers" platform limit with AnyConnect. Without an AnyConnect Essentials license, you are limited to the 'SSLVPN Peers' limit on your device. With the Anyconnect Essentials License, you can only use Anyconnect for SSL - other features such as CSD (Cisco Secure Desktop) and using the SSLVPN portal page for anything other than launching AnyConnect are restricted.
You can see your limits for the various licensing by issuing the 'show version' command on your ASA.
2) Is there a separate AnyConnect Essentials client needed on the ASA if I already have Anyconnect installed?
A: No. Anyconnect Essentials is just a license - there is no separate client needed.
3) How do I enable the AnyConnect Essentials license?
Instructions for installing the license key will be included when you get the license. Once you've installed the key and rebooted, running the 'show version' command should indicate that the license is enabled. You should see output similar ot the following:
AnyConnect Essentials : Enabled perpetual
Once that is there, you turn on the license by doing the following:
4) So I can't use the portal page at all with AnyConnect essentials?
A: The portal page exists, but once logging in you will immediately launch AnyConnect. Other features (bookmarks, java plug-ins, etc) will not be available.
5) What version of ASA code do I need for AnyConnect Essentials?
A: ASA 8.2 and above support AnyConnect Essentials.
6) Exactly which features are supported by AnyConnect Essentials vs Anyconnect Premium Licensing?
I am keen to watch some of the ISE Webinar Recordings but I can't seem to access them. I am registered and logged in, but I cannot figure out whether I am locked out, or whether these sessions were not recorded - it's contradictory.
Hi I'm thinking a ise deployment and I want use a "2-node deployment (redundant)" with a "node A" and "node B", and use a "node C" as standalone node for syslog or loggin. Can use this deployment? Regards.
Duplicate header name; X-Agari-Policy-Matched: Compromised_SendersX-Agari-Policy-Matched: Untrusted MessagesX-Agari-Trust-Score: 1.0 I have a content filter that writes the header to the log; Condition: No conditionAction: log-entry("C...
I'm running ISE 2.4 Patch 10, and I'm hitting a roadblock when my BYOD users are trying to renew their (expiring) certificates. I've built an AuthZ profile that is applied when a user's BYOD certificate is within 30 days of expiration. I though...