cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Webcast -VXLAN BGP EVPNt

ARP PERMIT-NONCONNECTED IN CISCO FTD 6.2.3.x WORKAROUND

852
Views
10
Helpful
4
Comments

Symptoms

Getting error while creating arp permit-nonconnected as flex config in FTD running 6.2.3.x and can be able to create in earlier versions.

1.PNG

 

Work Around to fix this issue

 

Create a flex config text object and add variable as RP

Capture1.JPG

Then create a flex config object " type A then insert the text object which we created earlier and type PERMIT-NONCONNECTED

 

Capture2.JPG

then add this to flex config policy and assign to the device.

Capture3.JPG

 

Tested this in 6.2.3.5 and its working.

 

Hope this will be useful for someone need to add this command when they needed to connect a non-connected subnet.

 

TAC submitted this issue as a defect with high-sev defect #CSCvn14276. so they can fix this in newer versions

 

-Abheesh

Comments
Excellent find! thanks for sharing
Hall of Fame Master

Thanks for sharing. You might want to have a llok at the published bug and correct the syntax. It currently says:

 

Workaround:
1. Add a Text Object as rp.
Under to Objects > Object Management > Text Object.
2. Access to FlexConfig and insert the created variable to FlexConfig, it will be like the following;
r$rp permit-nonconnected

 

The last line should be:

 

a$rp permit-nonconnected

 

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvn14276

Enthusiast

Hi Marvin,

I have created a$rp permit-nonconnected as flex config object and its working, shared feedback to TAC to correct syntax in bug portal for CSCvn14276 .

 

Contributor

Great post. Worked for me!!