I have an ASA 5510 with a DMZ interface that has a Cisco 2800 router directly connected to it. I am having two issues:
1. I want to use WhatsUpGold on the Inside Lan to ping the router to monitor up status(at least the e0 int. directly connected to the ASA)
2. I want to connect to the router from the inside LAN using putty on port 22 (I believe I have configured the router properly to handle ssh connections on vty) *Right now I get a Putty fatal Error:Network error: Connection refused
The issue is, on the ASA we have an ACL bound to the inside interface with a Deny IP any any statement at the end so it is adding a layer of difficulty.
Do I need an ACE to the inside ACL allowing access from Inside to DMZ interface eq ssh? Same with ICMP Pings?
1. I would like to know if the SKUs in the ISE Ordering Guide (March 2019) are supported by the SNS 3400 series appliances.
Specifically these: L-ISE-BSE-P6, L-ISE-PLS-3Y-S6, and L-ISE-APX-S-5K=
2. The latest ordering guide has licenses ...
When configuring ZBFW, I have configs like this:policy-map type inspect MYPMAP
class type inspect everything
inspectIf I configure a bypass rule, it will be appended in the end, after everything but before class-default. Is there a way to add a classif...
I thought I had this sorted out earlier today but...not so much. Deploying a Cisco ASA 5506-x as firewall/router. Trying to accomplish some smarter VLAN'ing to segment traffic on my office/home network. Core switch is Cisco 3560cg. There's some other...
Hi can we configure WCCP with HSRP in cisco switches. we have 2 x switches and 2 x wsa and each WSA will be connecting with each swicth and we want yo run HSRP however i have couple Query 1- will WCCP work with HSRP ?2- is there...