Brocade-ICX6610-NAD-Config

1111

Views

Helpful

Comments

edited on: ‎11-01-2016 ‎05:44 PM

Working Brocade ICX6610 switch configuration used in ISE testing.

See the ISE Third-Party NAD Profiles document for additional NAD configurations and profiles.

Latest Contents

GRE Tunnel (Packet Tracer Bug?)

Created by Thomas L on 04-16-2021 01:50 AM

Hi Guys, i have some issue with GRE Tunnel in Packet Tracer during my Training.. all the setup is correct, both tunnel is up/up, but i dk why it just cannot go like 192.168.1.2 -> 192.168.25.2 -> 10.0.0.2

snort version on device is out of date

Created by network1215 on 04-16-2021 01:21 AM

I am trying to push software update to FTDs from FMC FMC running 6.6.1 version and same version trying to push on FTD but it gives error message. Pre upgrade validation - snort version on device is out of date. Deploy access control policy from... view more

TrustSec has been stopped or not? TrustSec 已停用了吗？

Created by cxpxm119114 on 04-16-2021 12:42 AM

this web says TrustSec is stopped.这个网站说已停，https://www.cisco.com/c/zh_cn/obsolete/security/cisco-trustsec.html?dtid=osscdc000283but Trustsec feature is newly add to the datasheet of Catalyst 9000 series in 2021, I do not believe it is obsolete. and I need ... view more

Firepower 1010 and ASA 9.14.2 Spanning-Tree BPUD Guard block...

Created by kerstin-534 on 04-16-2021 12:40 AM

Hi,we have seen that Firepower 1010 and ASA 9.14.2.x has Spanning-Tree BPUD Guard blocked port on connected Nexus Switch if at least 2 Ports (different VLANs) connected to same Switch. This does not occur in ASA 9.14.1. Hast anybody seen the sam... view more

Gateway for P1 and P2

Created by kostasthedelegate on 04-16-2021 12:35 AM

Hello, I would like to set different gateway for M1, P1 and P2 in WSA Is that possible?How it is configured? Thanks and regards, Konstantinos