Resolution
To resolve this issue, you can reload the PIX/ASA Firewall or perform the indicated steps. The commands you enter may differ from the ones shown, depending on your PIX configuration:
- Unapply the crypto map from the interface by issuing the no crypto map mymap interface outside command.
- Disable Internet Security Association and Key Management Protocol (ISAKMP), by issuing the no isakmp enable outside command.
- Clear the ISAKMP and IPSec security associations by issuing the clear crypto ipsec sa and clear crypto isakmp sa commands.
- Enable ISAKMP by issuing the isakmp enable interface-name command.
- Reapply the crypto map, by issuing the crypto map map-name interface interface-name command.