When you select Generate in the Secure Socket Layer (SSL) certificate section, the VPN 3000 series Concentrator is not able to generate the certificate. The following lines were captured from the event viewer in the VPN Concentrator.
1 01/01/2002 08:00:00.100 SEV=6 SSL/6 RPT=1
Generating certificate with keysize 1024.
2 01/01/2002 08:00:00.400 SEV=7 SSL/7 RPT=1
Attempting to generate new SSL default context.
3 01/01/2002 08:00:00.400 SEV=4 SSL/4 RPT=8
Unable to create SSL default context: bad certificate.
4 01/01/2002 08:00:00.500 SEV=7 SSL/11 RPT=1
SSLLoadLocalIdentity returned SSLIOErr.
Delete any existing certificates, save the configuration, and reload the VPN Concentrator.
Select Administration > Certificate Management.
In the Actions box for the SSL Certificate listing, click Delete.
Select Administration > System Reboot.
Select Save the active configuration at time of reboot and select Now, and then click Apply.
You should be able to generate a new SSL certificate after the reload is complete.
I recently installed a FMCv on VMware (v6.6.1) and 2x 2110 FTD units which came with 126.96.36.199. I expected updates for the 2110s to appear in the FMC so I could upgrade to 6.6.1. It keeps saying "no updates available". FDB and GeoDB updates are workin...
Can I connect to the firewall after AnyConnect VPN is established?192.168.0.1 - inside interface on Firewall192.168.0.2 - server in private networkAfter establishing a vpn connection, I can ping 192.168.0.2. I canconnect to 192.168.0.2, but i can't ping 1...
Hello,I found in cisco documentation that BFD is not available on OSPF, only BGP.So I use BGP protocol on my fw FTD 2130.I use FDM to configure this FTD fw. In the BGP part, I activated this line:"neighbor 188.8.131.52 fall-over bfd single-hop" When I run...
Dear All, I have a simple setup with two routers (acting as server and client), where I am trying to test flexvpn using certificates. I am getting below error IKEv2:% Received cert hash is invalid, using configured trustpoints from pr...