ASA in Cisco ASA stands for Adaptive Security Appliance.
It is a security device that combines firewall, antivirus, intrusion prevention, and virtual private network (VPN) capabilities. It enable the user with proactive threat defense mechanism for the network
Beyond being a firewall, the Cisco ASA can do the following and more:
This situation can occur if the management interface of the system is used for failover mechanism.
To resolve this issue, adhere to these guidelines:
The management interface must not be used as a failover interface if there is a failover setup in the network.
The management interface can only be used as a regular interface if it is configured with the nomanagement-onlycommand.
Okay, this is my first time here. I am setting up a home lab. Router(2921) to a layer 3 switch(3560) to an ASA(5520). The router to layer 3 switch works fine. On the switch I have 2 vlans setup (vlan 1 10.4.0.1/24, vlan 2 10.3.0.1/24) connected directly t...
Any issues using same IP address (diff port for TACACS for f5 VIPs for both RADIUS functions and TACACS+ to the SAME PSN nodes? PSN nodes have ONE IP. Example:VIP1: 10.10.10.1 Radius VIP with all its settings for AUTHVIP2: 10.10.10.1 Profiling VIP as...
HI have a ASA instance on a Firepower 4420 device.I have defined Eth1/1 as the management interface with ip address 10.80.80.5 255.255.255.0 and default gateway as 10.80.80.1 config !interface Ethernet1/1management-onlynameif managementsec...
Hello, Currently I am running FMC 4000 with 126.96.36.199 ( Build 34 ). Planning to Patch FMC so that I can remove below both Vulnerability 1. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20191112-asa-ftd-lua-rce ----...
Hi I am planning to upgrade Email security Gateway C390 AsyncOS 11.1.0 to 12.5.0 version and its cluster environment looking helpful document and path .Please help to support to provide steps and after 11.1.0 can I jump direct on 12.0 version.&...