I am struggling to find out the number of total users that can use anyconnect VPN. Below is partial show version plus the group-policy. So we have 2500 users that are the max number, but if I have 3 simultaneous logins per user
Does it mean if I every VPN user account is shared between three people - I can have a total of 7500 anyconnect sessions ?
Is this achievable or not? :) How can I figure this out .
I've seen discussion in these forums and mention in the ISE Posture Best Practices about using the av-pair termination-action-modifier=1 setting to tell the NAD to use the same authentication method from the original authentication. This is def...
When configuring Do1X we can configure timers like this:dot1x timeout quiet-period 300
dot1x timeout tx-period 5
dot1x max-reauth-req 1But how do we configure timers for MAB authentication? Does it use the same values as Dot1X?
Hi,I am configuring NAC on a customers site. We are now rolling NAC out to all branches.I am configuring the radius servers on the switchaaa group server radius ISEserver name ise01server name ise02ip radius source-interface vlan 2!exitaaa authentication ...
Hi,I have to configure Anyconnect with Azure AD.I had followed this tutorial for saml auth:https://www.youtube.com/watch?v=bSGjeJotO2sBut this is just for ASA and the copy/paste text you prepare for the installation will not be accepted by Firepower.I hav...
Hi, I've rolled out dot1x via Cisco ISE onto a customer user network. The user access switches are 2960X. The version of ISE is 2.7 Patch 2. There are a few issues, specifically with a group of users. I want to created a new policy set for one u...