We have five network connections; Inside, Outside1, Outside2, Outside3, & DMZ.
Outside1, 2 and 3 are different networks for backup routes. Because Outside1 is now becoming over utilized,and Outside 2 and 3 is not being utilized much at all, we wanted to route traffic based on several aspects. one the source & two destination port. We also wanted to throttle the bandwidth on outgoing traffic.
is there Policy Based Routing available on the ASA 5510 as of yet? and if not, is there any plans for it in the near future?
I'm trying to create a control-plane ACL on the outside interface of one of our FTDs that's being managed by FDM. The following was pasted into the flexconfig template field: access-list CPLANE extended permit tcp host VPN_Client_IP host VPN_Server_I...
I have a Cisco ASA running 7.14. I have 2 WAN interfaces and a separate SSL vpn pointed to each WAN address. I have purchased 2 trusted certs and installed them. Is there a way to assign the correct cert to each AnyConnect profile? vpn.<company.co...
Hi Team,In my org, we are using Anyconnect IPsec-IKEv2 for all remote users and now we have to plan to have this integrated with DUO or Azure AD. So wanted to check whether with IKEv2, will it work or should I need to enable SSL as well ?
Hi all, Is there a way to restrict cisco anyconnect vpn user to access specific network IP range?Currently existing user connect vpn with cisco anyconnect and we only have one public IP dedicated for this purposes. user enter AD password and ID ...