When an attempt is made to change the IP address of a CiscoSecure ACS Solution Engine, the solution engine can boot with the Error: Failed to get NIC configuration: Null (FFFFFFFFF)error message sent to the console.
At times, the Error: Failed to get NIC configuration: rc = [-1] unknown error is also sent to console while the ip address is changed or configured.
In order to resolve this issue, backup the CiscoSecure ACS Solution Engine database configuration and re-image the device with the recovery CD. Then, assign the IP address to the solution engine and restore the database configuration.
Hi, We have a Cisco C170 Ironport with Sophos AV Active subscription on it dated till July 27 2023.The issue is that the Sophos AV engine is not updating.Our sellers asked us to open a ticket but seems we couldn't open a ticket because the C170 ...
I have a FPM 1010 and using FDM to program it. I am setting up an internal email server for a customer. I can connect to it using telnet to port 25 from my office 99.28.XXX.XXX using the natted public IP address 100.100.XXX.XXX to internal 192....
Hi, I'm configuring some filtering rules in a firepower and it's not filtering my traffic.
I really don't know if it's because of a license issue or I have some bad configuration.
This is a lab that I am doing with an IOS that I downloaded from the Cisco ...
HI folks,from external IP 188.8.131.52 (DNS name alice.bob, asa iface outside) portforward 80/443 tcp to internal webserver IP 10.10.10.10/24 (asa iface inside 10.10.10.1). All work properly. Now , how can I enable conn from IP 10.10.10.100/24 on to...
i have a problem with the integration ISE and stealthwatch Pxgrid. The integration is fine but the final status in ISE client is (offline XMPP). Stealthwatch dont show the username only show the IP address (integration Stealthwatch with Active Director...