cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Ask the Expert- SD-WAN

CLI Help on the 2621XM Series router with Cisco IOS 12.2 states that the aaa authorization network command supports default list only

923
Views
0
Helpful
0
Comments

Core issue

This happens because there is an error in the Command Line Interface (CLI) Help. When the CLI Help is accessed on a Cisco IOS  router, the aaa authorization network command could appear as shown:

Router(config)#aaa author network ?
  default  The default authorization list
.

Resolution

The aaa authorization network command is supported, as shown, by default and for a named list authorization.

aaa authorization network group radius local

For more information, refer to the Named Method List Configuration section of Configuring Authorization.