WebVPN can be defined as a VPN connection which is established by a web browser over SSL. A VPN connection facilitates a secure channel of communication between the host and remote machine.
ASA 7.x Citrix is supported inWebvpn
ASA 8.x Citrix is supported inWebvpn
VPN 3K: Web VPN is supported with Citrix, but only with Cisco VPN Concentrator Software version 4.7 and later
Web VPN is supported with Citrix, but only with Cisco VPN Concentrator Software version 4.7 and later.
This release includes support for Citrix MetaFrame services through WebVPN. The VPN Concentrator functions as the Citrix secure gateway. However, you configure your Citrix web interface software in Normal Address mode. You must install an SSL certificate on the VPN Concentrator interface that the clients connect to using a fully-qualified domain name (FQDN). This function does not work if you specify an IP address as the common name (CN) for the SSL certificate.
Select Configuration > User Management > Base Group/Group and go to the WebVPN tab to configure Citrix MetaFrame support.
Select Administration > Certificate Management to configure the SSL certificate.
The Citrix client attempts to use the FQDN to communicate with the VPN Concentrator. Your PC must be able to use the Domain Name System (DNS) or an entry in the System32\drivers\etc\hosts file to resolve the FQDN.
Hello All, Have two query it would be great help if anyone helps 1) My company management wants to configure 'syslog logging facility' is equal to '23' is it possible to do that in ASA ?. Also need to reconfigure rsa key pair equal or ...
I have an internet speed of 140-150 Mbps but when I connect to the Cisco Anyconnect Secure Mobile client it kills my internet speed to 500-1000 kbps which is too slow. What possible solution I can try to increase my speed on VpnOS - Ubuntu 18.04.5 LTS
Hello everyone.I'm currently setting up a FMC and while attempting to use external authentication via LDAP, for some reason the FMC is not querying properly.Basically whenever I attempt the test the query, it only finds user machines and groups CNs , not ...
I have added the CRL URL link in the FMC (Ver 6.6.4) But after adding the CRL url link FMC GUI login page not coming but I m able to login through CLI. Pls suggest how to remove CRL url link from the FMC CLI.
Greetings, 'Port Bounce' or 'Reauth' is available in Administration > System > Settings > Profiling. I have it set as 'Reauth' How do I actually make ISE to send a 'Port Bounce' to place a device in a separate VLAN. Please he...