cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Exact Steps on IAS server to configure TUNNEL GROUP LOCK for webvpn

632
Views
0
Helpful
0
Comments

Exact Steps on  IAS server to configure TUNNEL GROUP LOCK for webvpn users.

IAS server Steps
1. Go to Remote Access Policies.
2. Go to the remote access policy, make a right click on the policy and click on the "Properties" .
3. Click on Edit Profile.
4. Click on Advanced Tab.
5. Click on Add.
6. Scroll down to "Vendor-Specific" Radius attribute.
7. Select it and click on Add.
8. Make sure Attribute Number is set to 26.
9. Click on Add.
10. Enter Vendor Code: 3076.
11. Select radio button : Yes. It confirms.
12. Click on Configure Attributes.
13. Vendor-Assigned attribute number: 085
14. Attribute format: String.
15. Attribute Value: <tunnel-group name>



tunnel-group-lock with webvpn On ASA
conf t# tunnel-group-list enable
tunnel-group <tunnel-group_name> webvpn-attributes
group-alias <tunnel-group_name> enable

Content for Community-Ad