This is because the CSD HostScan code signing certificate expired yesterday. Mac and Windows users are not affected as the client code only checks if the certificate was valid when the code was signed. However, the Linux code checks on the current validity of the certificate.
The behavior on Linux will be changed as soon as posisble to mirror the treatment on MAC and Windows. While we don't recommend changing the system clock as a matter of course, for the time being the only way around it is to reset the linux system clock to something before Feb 7th, 2013. Please see bug CSCue49663 for addition details. Important UPDATE: This bug is now fixed in AC 3.1.2043.
Your ASA should be configured as follows: webvpn enable outside csd hostscan image disk0:/hostscan_3.1.02043-k9.pkg csd enable anyconnect image disk0:/anyconnect-win-3.1.02040-k9.pkg 1 regex "Windows NT" anyconnect image disk0:/anyconnect-macosx-i386-3.1.02040-k9.pkg 2 regex "Mac OS" anyconnect image disk0:/anyconnect-linux-3.1.02043-k9.pkg* 3 regex "Linux"
I’ve been trying get to work for over a year. ATT came out with this document. Any suggestions on how to implement this would be appreciated. https://www.att.com/esupport/article.html#!/wireless/KM1114459
I seem to have this strange problem with ASDM on one of my ASA5515's in the pair, the standby unit does not have the problem I am about to describe. ASDM was working just fine then suddenly I am unable to connect to it on, only on the Primary, the Se...
Hi, I need to allow internet access for internal client for facebook access and need to build NAT on FMC. I did many times source NAT for internet access on other firewalls but not sure nat. type on. FMC. I can see client url traffic on fmc but ...