How To Enable SNMP On FirePower Using FDM

[davebush]

The attached document will guide you through configuring SNMP on a FirePower device using FDM. 

[Martin L]

Thanks for sharing!

[robinson]

Thanks for Sharing the write up.

[Steveo2000]

Hey, just want to ask you if you could also explain how to enable SNMP via FDM  (Cisco Firepower 1010) 6.7.

With 6.7 there is no FlexConfig for SNMP anymore and you have to use the REST API and this is nether

documented anywhere, nor are there any tutorials for SNMP configurations via API. This is ridiculously complicated.

BR

Steve

[Marcello75]

Hi, how to config the snmp via FDM using 6.7?

[Anupam Pavithran]

Here is an easy solution

https://community.cisco.com/t5/security-documents/firepower-device-manager-fdm-6-7-snmp-using-python-script/ta-p/4283247

[IvanAlvarenga25979]

I'm using 6.7 version and I'm having the same issue

[davebush]

Please note that my documentation only works on version 6.6 and prior. (I've used it as far back as version 6.4.) 

For version 6.7 or newer you will need to use @Anupam Pavithran's script from this posting. 

https://community.cisco.com/t5/security-documents/firepower-device-manager-fdm-6-7-snmp-using-python-script/tac-p/4290136#M7147

My FP1010 is on 6.7.0 now, and thanks to Anupam I'm able to get SNMP data into my Stealthwatch Enterprise system.