With your AMP for Endpoints, you can quickly detect, contain, and remediate malware before damage is done. Here are three ways you can stop the spread of malware in your environment:
Malware Detection and Blocking: AMP analyzes files at point of entry and can automatically catch and block known and unknown malware in real time using one-to-one signature matching, machine learning, and fuzzy fingerprinting.
Outbreak Control: Manage malicious file outbreaks with customizable lists, such as application blocking, custom detections, and IP blacklists and whitelists.
Detections and Quarantines: With a few clicks in the AMP for Endpoints console, you can stop the execution of malicious files on all endpoints and place them into quarantine under lock and key.
To learn more, and access additional resources on how your AMP for Endpoints can stop malware in its tracks, check out the overview here.
Hi Guys, just want to double check with you. In FTD, I have 2 subnet and if I need to have intervlan for those 2 VLAN, do I still need to configure an identity NAT or any NAT?My target is doing intervlan routing between the 2 VLAN without any IP change.th...
Hi,I set up DVTI in EVE with 2 routers. HUB------SPOKE.Virtual-template is not showing up/down. Instead of up/up.Checked Phase1 and Phase2 parameters but not sure where I made a mistake.Attached diagram and configuration.Please take a look.
I tested using both Cisco ISE 2.4 (patch 9) and Cisco ISE 2.6 (patch 1). I have a user who successfully authenticated via RADIUS against ISE. Under ISE, Operations > Live Logs (and Live sessions), I see the user authenticated. After the accounting requ...
Hello,I would like to download ESA software for C695. But I cannot find any versions for this model.https://software.cisco.com/download/home/282509130Does anyone know how to find it and download it? Thank you!SH SHAO