According to the manual Cisco IPICS Server Installation and Upgrade Guide Release 4.0(1)
The section under "Installing Cisco IPICS > Installing the Cisco Operating System > Step 4" after the install completes the server will reboot after which it will display the "Welcome Screen". At this point according to Step 6 states to assign the root user password as well as several other user accounts. Result:
At this point the MSP-1RU server simply reboots and displays the linux login prompt. It does not prompt to set the root user password or any other user account password so you can continue the installation.
This is for the new MSPs and isn't documented (yet) since these will be built/installed by Cisco manufacturing. But here are the steps:
login as root/password ipics
This will reboot the server and present you with all the screens for setting passwords, network, etc
I am building a system to consume the VPN data from the Cisco VPN servers via the API.1. what are the endpoints and any API documents?2. what credentials should I use to configure my API program?3. any library or SDK that I can use* I am referring to the ...
Hi all,Any idea about the traceback logs shown on my Cisco 1921 with IOS Version 15.2(2)I tried to decode the logs but I wasn't lucky enough! Traceback= 0x256D5600z 0x256F1FCCz 0x256F2074z 0x256F4C34z 0x25686FF0z 0x25687C54z 0x2412021Cz 0x241208A0zTr...
Are there any "Mode and Engines" that need to be configured in an environment with AMP and Carbon Black App control are both installed? Any documentation on how to configure both to coexist would be great!
Hi AllAfter installing the new Firewall- Cisco Adaptive Security Appliance Software Version 9.15(1) and installing VPN AnyConnect and I have IPCom to remote user we still getting traffic voice problems. The call can be completed, but there is no voice tra...
Hello, Trying to install IPS on C1100 platform been having no such luck, Guides are for 4K series ISR, unable to find an OVA for c1100, there is a TAR file but no OVA on it, also no such luck in following IOx guide not sure if I'm doing it correctly....