cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

ISE NFS Repository Configuration Example

4326
Views
15
Helpful
1
Comments

Configure Windows 2016 Server for NFS

1. Log in to the Windows 2016 Server and open Server Manager

2. Click on Add roles and features


001-AddRoles.png

 

3. Select Role-based or feature-based installation

002-Rolebasedinstall.png

 

4. Select a server from the server pool

004-ServerForNFS.png

 

5. Expand File and Storage Services and File and iSCSI Services and then select Server for NFS

004-ServerForNFS.png

 

6. Confirm to Add Features

005-ConfirmFeatures.png

 

7. Click Next on the Features Page

006-ClickNext.png

  

8. Click Install

007-Install.png

 

9. Close the window once Installation is complete

008-ClickClose.png

 

10. Create a shared folder and note the path

This example uses C:\NFSShare

009-NFSShare.png

 

 

11. Open Server Manager and click on File and Storage Services

010-FileStorageServices.png

 

12. Click on Shares

011-Shares.png

 

13. On the right of the screen, select the TASKS dropdown and click on New Share

012-NewShare.png

 

14. Select NFS Share – Quick

Click Next

013-NFSQuick.png

 

15. Set the Share Location to the shared folder created in step 10

Click Next

014-FilePath.png

 

16. Confirm the Share name, local path, and remote path

Click Next

015-ShareName.png

 

17. Specify authentication methods based on the security policy for your organization. For the lab demonstration, all options will be selected. 

Click Next016-Authentication.png

 

 

18. On the Share Permissions page click on Add

Set the ISE Host IP address

Set Share Permissions to Read / Write

Add the permission and repeat for any other hosts (MNT, etc.)

Allow root access

017-AddPermissions.png

 

19. Verify permissions and click Next

018-VerifyNext.png

 

20. Click on Customize permissions…

019-CustomizePermissions.png

 

Click Add

020-AddUser1.png

 

 

Click Select a principal

021-AddUser2.png

  

Since ISE NFS uses the ISE machine account for NFS access we will add the ISE machine to the allowed users

Add the ISE Machine Account

            Click OK

023-AddUser6.png

 

            Set Basic permissions and click OK

          023-AddUser52.png

 

Click Apply and OK

Click Next

 

21. Click Create

024-Create.png

 

22. Click Close

025-Close.png

 

 

Configure ISE to use the NFS Repository

 

1. Log in to the ISE GUI

2. Navigate to Administration > Maintenance

 

026-AdminMaint.png

 

3. Select Repository

 

027-Repository.png

  

4. Click Add

 

027-ClickAdd.png

  

5. Name the Repository

Set the protocol to NFS

Set the server FQDN or IP address

Set the Path

Click Submit

 

028-AddRepo.png

  

Verify ISE can view the contents of the repository from the CLI

 

1. Create a test file in the NFS repository

2. Access the ISE CLI via SSH

3. Run the command: show repository <repository name>

029-ShowRepo.png

 

 

Comments
Beginner

Exactly what I needed, thank you!!