An IKE session begins with the initiator sending a proposal or proposals to the responder. The proposals define what encryption and authentication protocols are acceptable, how long keys should remain active, and whether perfect forward secrecy should be enforced, for example. Multiple proposals can be sent in one offering. The first exchange between nodes establishes the basic security policy; the initiator proposes the encryption and authentication algorithms it is willing to use. The responder chooses the appropriate proposal (we'll assume a proposal is chosen) and sends it to the initiator. The next exchange passes Diffie-Hellman public keys and other data. All further negotiation is encrypted within the IKE SA. The third exchange authenticates the ISAKMP session. Once the IKE SA is established, IPSec negotiation (Quick Mode) begins.
Aggressive Mode squeezes the IKE SA negotiation into three packets, with all data required for the SA passed by the initiator. The responder sends the proposal, key material and ID, and authenticates the session in the next packet. The initiator replies by authenticating the session. Negotiation is quicker, and the initiator and responder ID pass in the clear.
IPSec negotiation, or Quick Mode, is similar to an Aggressive Mode IKE negotiation, except negotiation must be protected within an IKE SA. Quick Mode negotiates the SA for the data encryption and manages the key exchange for that IPSec SA.
Dear Expertsi have a currently FMC 750 managing FP 7110 , i want to migrate to FMC 1600 but the migration guide has no documentation to such model becz FM750 replacement is FMC 1000 and currently fmc1000 is also end of sale and replacement is FMC 1600,&nb...
Hi All- I have an ISE 2.7 cluster - two admin nodes and three PSNs. I have an AD External Identity Source that I use for computer based EAP-TLS authentication. We currently have about 10 domain controllers, several of whi...
Hi All,I currently have my ASA configured to authenticate against a RADIUS server for remote access VPN. The RADIUS server is setting the 'Class' attribute with a list of the users groups and I'd like to configure dynamic access policies using this inform...
Can you have a permit command set to allow a help-desk user to shut/no shut a particular interface or a limited range of interfaces on a switch without giving them access to the entire conf t command. What would the cmd and argument look like?