This problem occurs when the VLAN and the firewall-group command are not added to the Multilayer Switch Feature Card (MSFC) prior to the addition of VLAN interfaces to the Cisco Firewall Services Module (FWSM).
Add the VLAN and the firewall-group command to the MSFC before VLAN interfaces are added to the FWSM.
To add the firewall-group command, remove the interface from the FWSM and reapply the command on the MSFC. Then, re-add the interface and name the if statements to the FWSM. Now, the Switch Virtual Interface (SVI) successfully passes data between the MSFC and the FWSM.
We currently use vFMC v6.6 to manage firepowers.This is currently a single VM on our VM platform. The firepowers are sending their events to the FMC. So the FMC is the log-server. Is there a possibility to use scalability with the FMC platform? As in: If ...
Hi,I am facing a problem creating a backup. When I run the backup task, I get the message:Failure: Registration or CSM state are blocking BackupLog /var/log/backup.logThu Jul 29 14:57:55 2021 Mounted and chdir: /mnt/remote-storage/sf-storage/c3a738c4-e52d...
Hello, Does anyone have some experience with deploying AMP for Endpoints on VMware VDI Horizon, with SSO and Cisco Firepower 2120 at data center and Cisco Firepower 1120 at the edges.and how the management goes with FPMC. thanks
Team,I am stuck up in one issue with CISCO ASA5515 where i checked everything related to rules/access-list but not able to get why firewall inside ip is not able to respond back to Scanner,Just want to know is their some other extra config to be don...