So it's critical that the ASA, CX and PRSM all have the same time. Obviously the easiest and correct way to ensure this is by using NTP. It took way too long to figure out NTP on CDA and PRSM so hopefully I can save you some time by posting the commands. I live in the United States and in the Central time zone. You'll need to make some adjustments to fit your timezone. Also, the NTP server at 184.108.40.206 is at the University of Minnesota. You'll want to select a NTP server local to your timezone. There's a link at the bottom to find NTP servers near you.
NTP on ASA
ntp server 220.127.116.11
clock timezone CST -6
clock summer-time CDT recurring
clock summer-time CST recurring 2 Sun Mar 2:00 1 Sun Nov 2:00
Hi Team,We have 2 ISP with our Firepower and we are looking into redundancy for our AnyConnect VPN and we found the Backup Server.Our request:We just want AnyConnect to automatically reconnect to the Backup Server in the list when a remote anyconnect user...
Hello, For whatever reason ISE 2.3 3495 is extremely slow when accessing context visibility. All other page works fine. Except for when we filtered a identity group endpoint. We tried chrome and firefox. We also downloaded the ...
When our AnyConnect clients connect remotely, they get a 172.a.b.c address from our ASA and register this address with our DNS server, so everything is good... until they get back into the office.... when the client later boots up onto the corporate LAN, ...
We are trying to get our ISE 2.6 to take radius accounting packets (from Aruba Clearpass) and convert them into Identities to then pass off to our FMC and FTD. We are seeing the endpoints show up in ISE and we see all the correct information however ...