PIX/ASA version 7.0.4 drops packets that need to be encrypted for a valid LAN-to-LAN (L2L) Virtual Private Network (VPN) peer.
This issue is due to the presence of Cisco bug ID CSCsd93380.
In PIX/ASA version 7.0.4, a valid output from the show crypto ipsec sa command is present. QuickMode completes and the active Security Parameter Index (SPI) values are present. Furthermore, the remote site is able to send traffic. The #pkts decrypt counter increases, but the #pkts encrypt counter does not increase.
This is output from the show crypto ipsec sa command:
Hi. I'm the network admin for my organization and we've been having some security issues on our network recently so I'm trying to investigate using wireshark. But my issue is that wireshark only captures packets that come to my device's network inter...
Cisco Router 2911, there are two problems:1. SSL from outside not working. From outside I mean to access router on WAN Port from my home. 2. Ping Router WAN Port from outside i.e. from my home. Complete configuration is as follows, please ...
Hello Guys, I am using cisco 2802 AP as WLC and using ISE for AAA. Clients should be authenticate by using EAP-TLS. I am getting these errors: 5411 Supplicant stopped responding to ISE 12931 Supplicant stopped responding to ISE af...
Hi, my Customer has some strange behaviors on his Switches with some clients.First the config (Closed Mode): aaa group server radius ISE
server name cisco-nac01
server name cisco-nac02
aaa authentication dot1x default group ISE
i have a cat 9704 core which is configured as a dhcp server for out data and voice.it is configured to provide 10.0 range to PCs and 20.0 range to ip phones. now am having 3 ip phones getting ip address in 10.0 range.I tried clear ip address binding comma...