cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Secondary VPN in Site-to-Site in ASA

974
Views
0
Helpful
1
Comments

Hi,

I have a requirement to create two IPSEC Site-to-Site VPN's as primary and secondary between three different locations.

Loc1: is Primary Data Center

Loc2: is Secondary Data Center

Loc3: Support Center

Note: Loc2 is a DR Setup, if Loc1 is having any probloem with out any outgate or manual interption, from the backup Data Center, all the opertaions should work.

From Loc3 am creating a site-site VPN tunnel to Loc1 this is the primary one. from the same Loc3 am creating another site-ste VPN tunnel to Loc2 as a backup. If the primary will goes down, automatically the backup should srart work from the Loc3.

The complete setup and IP Network is same In Loc1 & Loc2 except the Internet connectivity.

Need experts help to proceed further.

Thanks,

Sivanesan.P

Comments
Beginner

Want to add one more thing.

From location3 if loc1 if not reachable, using the secondary vpn i need to reach the Loc2. Once the Loc1 is reachable it should go back Loc1 using the the primary vpn.

Thanks,

Sivanesan.P

Content for Community-Ad