The Cisco TAC IPS Media Series is created by Cisco TAC engineers. Each episode will concentrate on a particular feature of the IPS, with a portion dedicated to configuration and a portion dedicated to troubleshooting and debugging.
Blayne Dreier - CCIE No. 19346, has been with Cisco for 7+ years, focusing on security technologies, and specializing in firewall and intrusion prevention systems. He is a member of the TAC escalation team and is actively engaged in the future direction of the IPS product.
Stijn Vanveerdeghem - CCIE Candidate, has been working with Cisco for 6+ years. Stijn worked in his native Belgium as well as in the US in various roles within Cisco. He is currently working as a specialist with the TAC IDS team.
We encourage you to listen and provide feedback on the episodes. We create these shows for you, and we want your feedback.
What future show topics would you like us to discuss? What do you like about the show, and how can we make it better.
Let's say that I have a few Sourcefire 3D Sensors (8130) and a Sourcefire Management Center that are on an OS that is before 5.4, one of them being on a version that's a bit older. What are the suggested upgrade paths for these devices? I know that I can'...
Hi - We currently have a slew of public facing email addresses that route to our internal mail server for agents to handle. We're going to move this process to the salesforce cloud and were provided one-to-one new address to redirect to: examp...
We have the Endpoint purge to delete any thing over 365 days, but this wasn't working as standard since in was installedSo disabled and enabled again and this seem to fix it, as had just under 200k endpoints captured. But it removed all clients that ...
I need to remove the "a=crypto:" part from my SDP header to my ISP SDP header from PureCloud via TLSContent-Type: application/sdpUser-Agent: ININ-EDGE/18.104.22.16858Content-Length: 351v=0o=- 2580238779 3812407684 IN IP4 172.24.22.90s=-c=IN IP4 172.24.22....
I activated the securityk9 license on the next boot on 2 x 4331 routers and it changed to "EvalRightToUse" so i could configure TLS and so forth.I just want to confirm the below statement with Cisco, but to my knowledge this should be fine for us in other...