The Cisco TAC Security Podcast Series is created by Cisco TAC engineers. Each episode provides an in-depth technical discussion of Cisco product security features, with emphasis on troubleshooting.
(Left to right) Blayne Dreier (on MAC), Jay Johnston, David White, Magnus Mortensen
Subscribe to the Podcast
Subscribe to the Podcast in iTunes by clicking the image below:
Alternatively, you can search within iTunes for Cisco TAC Security Podcast, and subscribe there. By subscribing, you will automatically receive future episodes when they are posted.
You can call +1 (424) 272-6877 to leave a voicemail for the TAC Security Podcast Team! Please leave us a message with your feedback about the show, and if you have a technical question that you would like us to discuss on the podcast, please leave a messages with your detailed question, a note saying we have permission to use your question and tell us how to pronounce your name.
We encourage you to listen and provide feedback on the episodes. We create these shows for you, and we want your feedback.
What future show topics would you like us to discuss? What do you like about the show, and how can we make it better?
Jay Johnston - CCIE No. 17663, has worked in the Cisco TAC for the last 6+ years, specializing in security technologies. He is on the TAC escalation team focusing on ASA, FWSM and IOS Firewall support and is a speaker at Cisco's yearly Cisco Live! conference.
Blayne Dreier - CCIE No. 19346, has been with Cisco for 6+ years, focusing on security technologies, and specializing in firewall and intrusion prevention systems. He is a member of the TAC escalation team and is actively engaged in the future direction of the IPS product.
Magnus Mortensen - CCIE No. 28219, has been with Cisco since June of 2006 and has been working with the Firewall ever since. He specializes in the full breadth of Firewall technologies.
Hi everyone,Following up a SOHO network that I am designing, I have an ASA 5505 firewall behind a router, and I need some end devices like the NAS and FTP server to be configured with static IP addresses so that I can access them remotely via DDNS. Howeve...
Hello, I got a reported alarm from the customer, so it looks like if phase 2 VPN (IPsec) has some issue, however when I validate the status of the IPsec it is active. Alarm:Último interno &nbs...
Do Cisco IronPorts start with an MID of 0 (zero) or 1 (one)? I have only seen MID 0 for "Message size exceeds limit". Is 0 reserved for this notice or is it ALSO a valid MID when a system restarts/rolls over. Thank you
I have a pair of 3850's, between them is a 5 member Etherchannel, on each Port there is a Pair of Microwave Radios, 10 in all, that have specific IP addresses for management, in a specific in band management Vlan100, it is not native and not Vlan 1, all t...