Since the Adaptive Security Appliance (ASA) 5500 sits behind a Network Address Translation (NAT)/Port Address Translation (PAT) device, the VPN peers (clients as well as LAN-to-LAN peers) either cannot connect or cannot pass traffic.
Encapsulating Security Payload (ESP) is not compatible with the NAT. When a VPN peer sends an ESP packet that gets NATed on the way, the remote peer discards that packet, assuming it is coming from an unauthorized source.
To resolve this problem configure IPSec NAT Transparency on the ASA, VPN clients and other VPN peers. On the ASA, issue the isakmp nat-traversalcommand.
In addition, make sure that UDP port 500 and 4500 are allowed through the NAT/PAT device.
1. I have one 4431 ISR Router, One ASA 5516, one Ca- Switch.Which must be done:*Need to Access my 3 host server via SSH from internet with my Public IP.*Need to Access my web server from internet with my Public IP via 80 and 443.I done Static na...
Hi all,We’ve deployed FTD HA managed by FMC. Last week the primary unit had failed and we are running with only secondary FTD.And we are now planning to replace the primary unit with new FTD. Are there any ways to replace the unit without breaking the HA ...
Hello, can someone please help me with a configuration guide with requirements for integration of AD with FTD (FMC) using ISE as Identity source for captive portal authentication. Regards,Juan Carlos Arias
Hi All I want to ask a thing related this ? we have FTD/FMC and along with treat/malware license and we want to block files according to SHA-256 , SHA1 and MD5 signatures. There is no problem with SHA-256 because we can add custom fi...
I have configured my access switch interfaces with DOT1X authentication from Radius server. And my end host connected with these interfaces are getting their IP from DHCP server. But since my end host clients are not able to authenticate successfully, hen...