Note: With Cisco VPN client version 4.6.x and later, the maximum pre-shared key length for the VPN Client is 128 characters. The previous limit was 32 characters. The increased key size works only with central-site devices that support 128 characters, for example, an ASA device.
If the central-site device does not support 128 characters, for example, a VPN 3000 Concentrator, you receive the same log messages as if the pre-shared key were wrong:
386 15:39:39.010 03/30/05 Sev=Warning/3 IKE/0xE3000056 The received HASH payload cannot be verified
387 15:39:39.010 03/30/05 Sev=Warning/2 IKE/0xE300007D Hash verification failed... may be configured with invalid group password.
ASA9.1(5)ASDM 771I used vpn wizards to configure ssl vpn client ( AnyConnect)1- when i try to transfer operations on the asa device, i see this "big list" of commands called AnyConnect_Client_Local_Print ACL !!I couldn't not cancel it and i don't und...
Hi All, Would like some configuration guide on the attached setup for the cisco asa anyconnect behind another firewall. The perimeter firewall will have public IP address natted to the cisco asa interface (using private ip address). However, in this ...
Hello All, I am facing issue in Cisco ISE for Wired Users and would like to get your help. Below are the details 1. We are using ISE version 2.7. 2. Two different series of Cisco Switches 2960x and 9200 3. No issue faced by users who a...