In a Router running 12.4(20)T version and trying to install Anyconnect .pkg file through SDM 2.5, you will receive an error message as follows
"Error installing package: Unknown Error. This maybe occurs if your router uses a LEFS file system. Converting it to a use a DOS files system may resolve this issue."
This issue occurs due to the lack of support for anyconnect package in SDM 2.5 and hence the warning. Use Cisco Configuration Professional (Cisco Configuration Professional (CCP)) 1.2 and above to install the .pkg file. It has the similar device manager support as like SDM.
CCP is a GUI-based device management tool that allows you to configure Cisco IOS-based access routers, including Cisco integrated services routers,Cisco 7200 series routers, and the Cisco 7301 router. CCP is installed on a PC and simplifies router, security, unified communications, wireless, WAN, and basic LAN configuration through GUI-based, easy-to-use wizards.
Routers that are ordered with CCP are shipped with Cisco Configuration Professional Express (CCP Express) installed in router flash memory. CCP Express is a lightweight version of CCP. You can use CCP Express to configure basic security features on the router's LAN and WAN interfaces. CCP Express is available on the router flash memory.
In order to use Citrix, I followed the instruction in the URL: https://answers.uillinois.edu/illinois.engineering/page.php?id=81722. I selected '3_Tunnel All' when connecting the VPN. However, the connection failed, and I can no longer acce...
I recently purchased a Cisco ASA-SSM-AIP-20-K9 AIP Security Advanced Services Module from eBay and installed it into my Cisco ASA5540 firewall. It is shown properly, using the "show inv" command. I just need help in figuring out how to install...
Hi,We have a schedule ASA (HA) 5585-X up-gradation scheduled for next week end. Current ASA version is 9.1(6)10, & we are planing to upgrade to 9.8(4) 10 version.Please let me know, if i can directly upgrade to 9.8(4)10 version from current 9.1(6)10, ...
Hi, I have a problem deploying firepower 2140. I can't deploy FTD via firesight management center and show me an error "Deployment failed due to communication failure with device". when I checked in Device Manager panel, everything seems good. then I anal...