I had had to upload an upgrade to Firepower Management Center over a lossy VPN connection where HTTP uploads were failing. I ended up using Filezlla and depending on resume to get the upgrade uploaded to the system. I just thought I'd share the process in case someone else ran into this.
So, just pop in the IP address of Firepower Management Center into Filezilla or whatever SFTP client you like - sftp://a.b.c.d, port 22, and login as admin.
You will be dropped into /Volume/home/admin, where you'll have permission to upload the upgrade file into. When the file is done uploading, SSH into FPMC and run this command:
Hi Guys, just want to double check with you. In FTD, I have 2 subnet and if I need to have intervlan for those 2 VLAN, do I still need to configure an identity NAT or any NAT?My target is doing intervlan routing between the 2 VLAN without any IP change.th...
Hi,I set up DVTI in EVE with 2 routers. HUB------SPOKE.Virtual-template is not showing up/down. Instead of up/up.Checked Phase1 and Phase2 parameters but not sure where I made a mistake.Attached diagram and configuration.Please take a look.
I tested using both Cisco ISE 2.4 (patch 9) and Cisco ISE 2.6 (patch 1). I have a user who successfully authenticated via RADIUS against ISE. Under ISE, Operations > Live Logs (and Live sessions), I see the user authenticated. After the accounting requ...