FirePOWER Threat Defense for Integrated Services Routers ( ISR )(Live Webcast July 8, 2015 at 10:00 am Pacific Time / 1:00 pm Eastern Time)
Ask questions from July 8, 2015 through July 17, 2015
In October 2013 Cisco acquired Source Fire, an industry leader in the security solution space. Since the acquisition, Cisco has integrated Source Fire in the ASA platforms as well as in the ISR platforms.
In this session you will learn about Source Fire company history, the rebranding of Source Fire as FirePOWER Services and how to use FirePOWER effectively on the ISR G2 and 4K platforms on the UCS-E blade to secure the network from attacks and malware.
Kureli Sankar started with Cisco in Aug, 2006 as a TAC engineer in the firewall team in Research Triangle Park, North Carolina. As a TAC engineer she supported Cisco's security products. Since, May 6th 2013, she has taken up a new role as Technical Marketing Engineer, Enterprise Infrastructure and Solutions Group responsible for security features on Cisco's IOS and XE products.
She has presented at Cisco Live 2013 and 2014. She has also done quite a few Live Web Casts and ATE (Ask The Expert) events for our forum.
Prior to joining Cisco, Sankar worked for John Morrell Co., Cincinnati, Ohio where she was the network administrator in charge of the company's enterprise network covering 27 locations in the United States. She also was an adjunct professor at the University of Cincinnati, teaching undergraduate level networking courses. Sankar holds an engineering degree in Electrical and Electronics Engineering from Regional Engineering College, Trichirappalli, India, CCSP and CCIE Security #35505 certifications.While working full time, she volunteers at various organizations like Citizen School, Durham Performance Learning Center, NC First Robotics, Girl Scouts - Carolina, Raleigh Rescue Mission and gives back to the community
A customer of mine is doing validation testing for ISE 2.6 and came across FN 70357. https://www.cisco.com/c/en/us/support/docs/field-notices/703/fn70357.html
Based on this, it is clear that TLS 1.2 support is not available in ISE 2.6. W...
Hello,I am facing an issue with SSH/HTTPS management access on a Firepower 4100. After un-boxing the device, I consoled in and ran through the initial setup. I assigned the IP, subnet, hostname, default gateway, and IP blocks on the interface....
Hello all, I was trying to upgrade to the latest Anyconnect version on the ASA pair. I successfully did that, to both of them but in the process, the Primary active FW became as Secondary active to make it back to Primary active I gave the command: "...
I am trying to figure out the best way to set this up on an ASA (9.6).We want 10.0.1.0 to go out ISP1 unless it fails, then choose ISP2.We want 10.0.2.0 to go out ISP2 unless it fails, then choose ISP1.(This is for simplicity there are several networks)&n...