To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about the best practices to configure, deploy and troubleshoot Dynamic Multi-point VPN (DMVPN) on Cisco Routers. The session provides insight about the base components involved in DMVPN and its different phases of deployment. It focus particularly on the basic configuration of its phases and on the best practices required when using DMVPN on Cisco routers.
Dynamic Multipoint VPN is a Cisco IOS/IOS-XE Software solution for building scalable IPsec Virtual Private Networks (VPNs). This routing technique is used to build Virtual Private Networks with multiple sites without having to statically configure all devices, DMVPN essentially creates a mesh VPN topology over the public or private WAN or Internet. Its deployments include mechanisms such as GRE tunneling and IPsec encryption with Next Hop Resolution Protocol (NHRP) routing, they are designed to reduce administrative burden and provide reliable dynamic connectivity between sites.
Ask questions from Monday November 26th to Friday 14th of December, 2018
Leonardo Peña Davilais a Network Engineer with over 15 years of experience on network design, enterprise networks, administration and support. He works as Network Engineer on Microplus Computo y Servicios in Mexico. Before he worked on Petroleos de Venezuela as Network Engineer administrating and managing a diverse amount of complex networks, from WLC, ACS, ASA to CUCM. Leonardo obtained his first Cisco CCNA certification in 2002 and he has a CCNP R&S as well, he is passionate about his profession and committed to keep up-to-date with new technology developments. He is interested on Data Center technology, particularly on Nexus switches, APIC, APIC-EM, VMware virtualization, ESX, ESXi, UCS and Network Programmability.
Leonardo might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Security community.
Hi Team,we are using Solar winds monitoring tool and enabled NetFlow in ASA. everything is working perfectly expect bandwidth utilization is showing spikes. as per analysis there is no possibility for this spike because in the ISP side monitoring tool uti...
I use old good Cisco ASA 5550-failover clusters.I dont understand its current throughput.In Cisco datasheet info : Firewall Throughput Up to 1.2 Gbps ( 600 Mbps input + 600 Mbps output ) - right ? My config: Firewall mode: Transparent&...
Hi, I have FMC1000 appliance which running on version 6.3. I would like to verify hardware infomation of the FMC via CLI such as NIC, CPU cores, Memory, Event storage space and power supply status. Unfortunately, I have found only "show ver...
Team Hi,While reading about IPSec VPN the below mentioned statement has raised me a doubt "The peer that has traffic that should be protected will initiate the IKE phase 1 negotiation." So as per the above statement it states that the peer...
I am proposing to upgrade a customer's SNS-3595 from ISE 2.2 to ISE 2.4 via the rebuild process ;-) These nodes have some corruption in them and I would feel more comfortable with a complete rebuild. I don't have the luxury to rec...