FirePOWER Threat Defense for Integrated Services Routers ( ISR ) (Live Webcast July 8, 2015 at 10:00 am Pacific Time / 1:00 pm Eastern Time)
Please join us on Wednesday, July 8th at 10 a.m. PDT San Francisco (UTC -7 hours) for this live, interactive event.
In October 2013 Cisco acquired Source Fire, an industry leader in the security solution space. Since the acquisition, Cisco has integrated Source Fire in the ASA platforms as well as in the ISR platforms.
In this session you will learn about Source Fire company history, the rebranding of Source Fire as FirePOWER Services and how to use FirePOWER effectively on the ISR G2 and 4K platforms on the UCS-E blade to secure the network from attacks and malware.
Kureli Sankar started with Cisco in Aug, 2006 as a TAC engineer in the firewall team in Research Triangle Park, North Carolina. As a TAC engineer she supported Cisco's security products. Since, May 6th 2013, she has taken up a new role as Technical Marketing Engineer, Enterprise Infrastructure and Solutions Group responsible for security features on Cisco's IOS and XE products.
She has presented at Cisco Live 2013 and 2014. She has also done quite a few Live Web Casts and ATE (Ask The Expert) events for our forum.
Prior to joining Cisco, Sankar worked for John Morrell Co., Cincinnati, Ohio where she was the network administrator in charge of the company's enterprise network covering 27 locations in the United States. She also was an adjunct professor at the University of Cincinnati, teaching undergraduate level networking courses. Sankar holds an engineering degree in Electrical and Electronics Engineering from Regional Engineering College, Trichirappalli, India, CCSP and CCIE Security #35505 certifications.While working full time, she volunteers at various organizations like Citizen School, Durham Performance Learning Center, NC First Robotics, Girl Scouts - Carolina, Raleigh Rescue Mission and gives back to the community
Hi ,I would like to ask about DMVPN setup.I tested DMVPN with GNS3.I am using ios c7200-adventerprisek9-mz.152-4.S7.image.I run EIGRP is overlay protocol to carry route.I also run static route redistribution.I didn't get eigrp route and static on my Branc...
Hello, Do we have any options in cisco ISE to identify, which certificates has been used by endpoint to get authenticated.Is there anyways in pulling report based on above mentioned statement. CISCO ISE 2.4 patch 10 Thanks and regards ...
We are rolling out 802.1x to an Industrial Manufacturer. Our maintenance windows are rather tight for the production floor, and we have a deadline for full TrustSec deployment by April 2020. For these reasons we are deploying in what we are cal...
There's a lot of material published about Threat Response, in places like http://cisco.com/go/threatresponse - but something I get asked by users is what can they do, to proactively stay informed and up to date? We are adding new integrations and new feat...