cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Migrate from C170 to C190

184
Views
5
Helpful
3
Comments
Beginner
Ask Me Anything (Formerly known as Ask the Expert)
thru

I need to migrate from C170 to C190 and have already match to the same Firmware Version. I have a question. Is there any method that can export and import the configuration file instead of form cluster ?

3 Comments
VIP Mentor

If the the version is correct on both, take backup config (without masking)

 

configure the new device with Management config and restore the config from backup. (make sure device offline)

 

Beginner

Export and Import Settings from Old Ironport C170 to New Ironport C190

  • Login the GUI
  • Go to System Administration  > Configuration File (Remember to uncheck the “Mask Passwords” option
  • Open both configuration file in a text editor
  • Find the following 2 entries in both conf files, and copy the values from the destination appliances’s conf file to the source conf file:
  • <db_environment_actual_size>
  • <tracking_global_max_db_size>
  • If the appliances have a different number of Ethernet Interfaces, you will need to completely remove the following sections from the source conf file:
  • <ethernet_settings> … </ethernet_settings>
  • <ports> … </ports>
  • Save a copy of the modified source conf file
  • Import the modified source conf file on the destination appliance
  • Commit the changes

Am I correct to follow this ?

VIP Mentor

yes you are correct.