cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1374
Views
0
Helpful
0
Comments
TCC_2
Advocate
Advocate

Core issue

This message on the VPN Client indicates that no address pool is configured. Another option is that there is no assignment mode on the Cisco VPN 3000 Concentrator.

The following log is seen on the VPN Concentrator, in addition to the error message seen on the VPN Client:

826 11/28/2001 16:22:48.640 SEV=7 IKEDBG/42 RPT=1 10.64.10.6
Group [vpn3000] User [ciscouser]
IKE received response of type [FAILED] to a request from the IP address utility
828 11/28/2001 16:22:48.640 SEV=5 IKE/132 RPT=1 10.64.10.6
Group [vpn3000] User [ciscouser]
Cannot obtain an IP address for remote peer

Resolution

Proceed with the following steps on the VPN Concentrator:

  1. Go to Configuration > System > Address Management > Pools, and add a small pool of free addresses on the internal network.
  2. Go to Configuration > System > Address Management > Assignment, and select only Use Address Pools.
  3. Try connecting the VPN Client to the VPN Concentrator.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers
Quick Links