I also have the problem of testing on ISE2.4 configured SNMP CoA, how to open the file you attached?
And I also open a case on Cisco TAC, but still have no answer for a long time, just searching on Cisco community for help.
Thank you very much for your sharing.
Please follow these steps:
1. Extract the zip file
2.Import the xml file into ISE under "Administration >Network Resources >Network Device Profiles"
3. Create network device and select this NAD profile in network device page.
But I still failed in the test, which model is in your testing? I use WS-C2960-24TC-S with LANlite, is there any different?
Thank you again.
Please make sure the 'Send SNMP COA separate request' option is enabled in imported NAD profile.
and make sure you have SNMP community with RW.
'snmp-server community ciscorw RW'
'ciscorw' is community string
if that doesn't help, please share wireshake file.
you can capture that in ISE under 'Operations > Troubleshoot > diagnostic Tools > General Tools > TCP Dump'
I did it, thank you very much again.
I also do the test on CISCO2950, but it not work.
By the way, do you have the network device profile of C2950?
I found the ifindex value of C2950 is different with C2960, maybe the NAD profile is not used to C2950， can I set the NAS-Port-ID with " ^.*Fa0\/(\d+).*$ " ? thank you again.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: