02-24-2012 10:53 AM - edited 02-21-2020 04:34 AM
Hi
I have upgraded ASA5510 256MB to 1G RAM.
After one day of working, ASA stop responding.
I reload the ASA, but nothing came on.
The LEDs are
Power GREEN, Status AMBER, Active AMBER, VPN GREEN, Flash OFF.
Any suggestions
Thanks
Solved! Go to Solution.
02-25-2012 08:52 AM
Status AMBER means you have not passed hardware diagnostics. I recommend you cycle power while connected via console and examine the power on self test output for additional information.
Opening the box back up and reseating the memory DIMM wouldn't hurt. You did use genuine Cisco memory and not a 3rd party, yes?
02-25-2012 08:52 AM
Status AMBER means you have not passed hardware diagnostics. I recommend you cycle power while connected via console and examine the power on self test output for additional information.
Opening the box back up and reseating the memory DIMM wouldn't hurt. You did use genuine Cisco memory and not a 3rd party, yes?
02-26-2012 05:22 AM
Thanks
I have already done it, more than ones and nothing.
But one more time, I thought it wouldn’t heart.
This time I disassembled everything it could be disassembled.
Clear everything and put it back.
Imagine - it works.
Thanks again
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide