Can't See Ping Connection

[er.vansh17091]

Hi Team,

I have a requirement from unboxing ASA to the configuration for 10 systems (LAN-connectivity behind the firewall).

We have WAN connectivity from UK to IND (assuming) -Like P2P.

UK users want to access the application from IND and IND users want to access the UK applications.

Connectivity would be : WAN link will drop on ASA firepower and later on we will have to configure the ASA for 10 system/PC/Server (statically -
NO DHCP).

For WAN connectivity we have (192.168.1.0/29) IP pool.
For LAN connectivity we have public IP 141.100.100.0/24).

I worked on ASA but didn't get the chance to work on ASA firepower module. can you please share the steps in sequence.

[Kasun Bandara]

Hi,

what is the FP version and ASA version you have? 

are you using Site-to-Site connection for connect IND-UK?

[er.vansh17091]

Hi,
Yup, I am looking multiple ways like S2S or any other ways through we can do connectivity bw UK-IND. Do you have any other options?

We are about to go through 9.8 Version?

[Kasun Bandara]

Hi,

please find few common options,

1 - you can do site-to-site VPNs - recommended for large number of users in both sides with different application types

2 - remote VPNs like anyconnect - for small to medium number of users with different application types

3 - port forwarding - recommended for specific application types such as  WEB applications, RDP, etc.

4 - IP VPN - will be high cost but guaranteed Bandwidth

[er.vansh17091]

Okay, thanks.

But if we go via s2s vpn, can we access multiple applications from both
locations.......to each other?

Why we need to do port forwarding in this scenario?

[Kasun Bandara]

in site to site scenario you do not need port forward. you can use any application. but always check with application vendor recommendation. some vendors are not optimized to connect through low speed connections.