11-25-2010 07:03 AM - edited 02-21-2020 04:10 AM
Hi!
when i can get information about hardware requirements for management of up to 2000 security devises? (IPS's and ASA's) ?
11-28-2010 06:05 PM
Sizing and scale for Cisco Security Manager is discussed in the following documentation:
11-29-2010 12:24 AM
Hi!
hardware requremets for large enterprizes stests that only up to 500 devices can be managed...?
11-29-2010 05:33 AM
I would reach out to your SE or reseller to verify, but I believe they are starting to recommend more of a finite limit on CS Manager managed devices.
12-06-2010 12:17 AM
Hi!
any ideas?
12-08-2010 03:00 PM
Alex,
let's go back to the design guide. 500 is the recommended number of device for that hw, however there is no hard limit on the number of device that you can import. So there are chance that if you import 2000 device your CSM still works fine.
However this really depends on the number/complexity of the policies you have on these devices and you might hit peformance issue even with less then 500 devices if these policies are too complex, as stated in the doc:
Now, most likely 2000 device on a single server might be too much and you might notice some performance hit, so you might want to use different servers to manage your devices (this is usually good choice). The way you organize your servers is arbitrary (you can do per location, per device type per technology etc...) An idea on how to organize multiple servers is given in the deployment guide as well:
I advice anyway to reach your Account Team, they will be able to suggest the solution that best fits your requirements
Hope this helps
Stefano
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide