[Cisco Security Manager][4.6] Hostname field in device properties ?
When adding a new device to CSM, there is a hostname field in the device properties. According to the user guide, this field correspond to the DNS name of the device but I don't understand when it is used. Morevover, it doesn't seems to be checked because i tried to type a random string (which doesn't match with the real hostname) and there was no error. What is the utility for this field ? Is it optionnal ?
Setting up some 3rd party devices for my Fire and Rescue trucks that will VPN back to our FPR-2110. I can blatantly see what's going on with the IKEv2 platform and protocol debugs on. It's selecting the wrong dynamic map!IKEv2-PLAT-4: (32): Cry...
On January 22, 2020, the Cisco Product Security Incident Response Team (PSIRT) disclosed a vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC). The vulnerability could allow an unauthenticated, remote attac...
Meet the Authors Event - A Cybersecurity Deep Dive with Omar Santos
(Live event – Thursday, January 23rd, 2020 at 10:00 a.m. Pacific / 1:00 p.m. Eastern / 7:00 p.m. Paris)
This event will have place on Thursday 23rd, January 2020 at 10hrs PDT
Posting this for anyone interested in using a Raspberry PI as a flow collector for Stealthwatch. We created a very lightweight version of our software. It can create flows if the eth port is attached to a SPAN or you can forward NetFlow/IPFIX ...