04-27-2011 07:19 PM - edited 02-21-2020 04:19 AM
hi guys.
I am new to cisco .i have some basic question to ask.
in my situation .i use a cisco 1841 .
ethernet 0/0 .i set serval vlan in this port .with the address 10.x.x.x /24
ethernet 0/1 .i set a global ip in it .with address of 219.x.x.x .and i have another global ip preserved .
the nat is ethernet 0/0 ----> ethernet 0/1 .
and my question is: how to create DMZ .i want to set another global ip in my Lan.
how can i do this setting.
any suggetsion?
Solved! Go to Solution.
05-06-2011 07:21 AM
HI,
To use global IP to your internal LAN you need to do Static NAT for external IP to internal LAN IP.
Use below command:
ip nat inside source static
Hope it will works.
Rate if it works for you.
Regards,
Janardhan
05-06-2011 07:21 AM
HI,
To use global IP to your internal LAN you need to do Static NAT for external IP to internal LAN IP.
Use below command:
ip nat inside source static
Hope it will works.
Rate if it works for you.
Regards,
Janardhan
05-08-2011 08:42 PM
Thanks a lot .
it work well for me now .
i have a another question.
i set the nat to gloable ip .and it works.i set it by the Cisco Configuration Professional
in the edit the static nat.
but there is a abnormal .
when the electronic is down. the setting change to the old one.
so what is the problem?
05-08-2011 09:25 PM
Hi,
You need to save the configuraion.
Regards,
janardhan
On Mon, May 9, 2011 at 9:13 AM, baorong.lai <
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide