Hi,
A client of mine needs to initiate a PPTP VPN 'from' a Cisco 877w router into a Windows Server 2008.
So have I have seen that VPDN should be used and have also stumbled across various scripts on the internet, however I cannot work out how to add them to my current 877 config(standard config initialising PPPoA session from Dialer 0-
Here is a script I found-
ip multicast-routing
no ip gratuitous-arps
service internal
vpdn enable
!
vpdn-group 1
request-dialin
protocol pptp
rotary-group 0
initiate-to ip SERVER IP
interface Dialer0
ip address negotiated
ip pim dense-mode
encapsulation ppp
dialer in-band
dialer idle-timeout 0
dialer string 111
dialer vpdn
dialer-group 1
no cdp enable
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp chap hostname USERNAME
ppp chap password PASSWORD
dialer-list 1 protocol ip permit
I added this to my working config- but no joy.
Please assist!
