11-17-2011 04:19 AM - edited 02-21-2020 04:30 AM
Hi! How i could import third party MIB file for my devices? Is there any guide/manual for working with non-cisco devices?
Solved! Go to Solution.
11-22-2011 07:04 AM
Hello
As mentioned earlier, if the device is not supported you can't manage it with LMS, this is true for most modules. HUM is the only one that can support third-party devices properly.
Regards
Farrukh
11-20-2011 02:00 AM
Specifically which module are you talking about?
The most flexibile module is HUM which has support for third party devices
Most modules do not support non cisco devices, compelte list is here:
http://www.cisco.com/en/US/products/ps11200/products_device_support_tables_list.html
Regards
Farrukh
11-22-2011 06:08 AM
Thanks for your answer! But if there is no my device in the list, what method or tool may i use to import this device in the cisco prime modules?
11-22-2011 07:04 AM
Hello
As mentioned earlier, if the device is not supported you can't manage it with LMS, this is true for most modules. HUM is the only one that can support third-party devices properly.
Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide