03-19-2014 10:48 PM - edited 02-21-2020 05:08 AM
Hi,
please help me to resolve the issue. i have created a DMZ Zone Network with public IP Addresses.
i have created Identity nat for DMZ Network access the internet. The server in the DMZ Is accessable from Internet.
To access the server from inside interface created ACE and NAT exampt . Able to ping and trace the DMZ Server from Inside interface but unable to open page or access the web server from inside interface.
please guide to resolve the issue.
Regards,
Saroj
03-20-2014 02:41 AM
Hi Saroj,
If server is ping-able from inside but specific page or application is not accessible, you need to check access-list to verify relevant TCP port are properly allowed for traffic from inside to DMZ or not.
Don't forget to rate helpfull posts
Sajid Ali Pathan
03-20-2014 04:07 AM
Hi,
In the access list from the inside to Dmz the services permit set is IP.
8 | True | LAN-NSGbolck16/22 | DMZ-HOST | ip | Permit | Default |
Regards,
Saroj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide