Earlier this year, we launched Cisco Identity Services Engine 2.6 that delivers great strides in capability, scalability, and performance. We also introduced all-new, high-performance Secure Network Server appliances: the SNS-3600 series. This new hardware is a vast improvement on our older models, so we’re encouraging everyone to consider adopting the new SNS-3600 series appliances now.
What are we announcing?
Support for ISE 2.4 on the SNS-3600 appliances
Why is this important for me?
Currently, you probably feel comfortable with running ISE Recommended Release in their production environments, yet SNS-3600 didn’t support ISE 2.4 (our current Recommended Release) upon its FCS. As a best practice and our normal policy, we only support the latest release (and future releases) on new hardware but not older releases – meaning that by policy, the SNS-3600 models supported only Cisco ISE 2.6 and not ISE 2.4. However, we understand that many of you still run ISE 2.4 and have asked for support on the new hardware.You asked and we listened- today, we’re happy to announce that Cisco ISE 2.4 is now supported on the new SNS-3600 series appliances.
Cisco ISE 2.4 remains our current Recommended Release, and ISE 2.6 is not far behind becoming the Recommended Release itself. ISE 2.6 enables the full power that comes with the SNS-3600 and includes much improvements from both stability and feature perspective, and we urge you to look into it as your next upgrade when it becomes Recommended. We will keep you updated the moment it becomes a Recommended Release.
What are my next steps?
Other than buying a couple of SNS-3600s and downloading the software, probably not much :-)
Folks,Does anyone know if we have a Cisco Anyconnect central manager? From what I understand we do not have one.My use case is that we have had few Anyconnect nodes across the globe and managing the configuration to keep it same everywhere does become a c...
I am building a system to consume the VPN data from the Cisco VPN servers via the API.1. what are the endpoints and any API documents?2. what credentials should I use to configure my API program?3. any library or SDK that I can use* I am referring to the ...
Hi all,Any idea about the traceback logs shown on my Cisco 1921 with IOS Version 15.2(2)I tried to decode the logs but I wasn't lucky enough! Traceback= 0x256D5600z 0x256F1FCCz 0x256F2074z 0x256F4C34z 0x25686FF0z 0x25687C54z 0x2412021Cz 0x241208A0zTr...
Are there any "Mode and Engines" that need to be configured in an environment with AMP and Carbon Black App control are both installed? Any documentation on how to configure both to coexist would be great!
Hi AllAfter installing the new Firewall- Cisco Adaptive Security Appliance Software Version 9.15(1) and installing VPN AnyConnect and I have IPCom to remote user we still getting traffic voice problems. The call can be completed, but there is no voice tra...