Advertise
BGP uses the network statement in the configuration to identify what networks you wish to advertise from your local networks. BGP then looks in the local routing table and if it finds a network in the routing table that matches the network statement (and matches the mask also) then BGP will advertise it.
Receives
BGP routes that it receives from a neighbor, This routes also advertise based on the config to other peers.
To view all BGP received-routes (both accepted and rejected)
#show ip bgp neighbors x.x.x.x received-routes
The accepted and stored BGP routes can be viewed using
# show ip bgp neighbors x.x.x.x routes
in your case this are AS Numbers in your configuration 65512 65513 65520 65589
Until we see your config and topology we do not have any visibility on your setup.