Server Networking

am facing a problem for my dialin clients. We are providing them dialin facility to our office network to access internet through our office lease line, so in this regards we installed Microsoft ISA Proxy Server and given them permissions to access i...

I have about 60 dlsw peers coming from remote location 2651s in to a 7513 router at a core operations center. Each remote location has an AS400 that connects to 10 AS400s at the core location via SNA. I am looking to filter traffic so that only SNA...

The problem is that bandwidth to our regional offices is being consumed by HTTP inbound traffic. Regional offices are connected via VPN tunnel over T1 links. Each office accesses the internet via their internet link, only data traverses the tunnel to...

Good DayI have a router, wich is given this errorJan 21 11:17:31.671: %SYS-5-TABLEERR: VOIP CC API table ccapi conferences damaged: node added twice?.i'm not using VoIp only VoFrThank You very much

Is it possible to configure both CSNA and DLSw+ on the same router, which is CIP attached to the mainframe?For example;User (SNA) -- Customer Router (DLSw+ Peer) -- ISDN -- Central Router (DLSw+ Peer) -- CIP -- MainframeCentral Router#!dlsw local-pee...

we are going to purchase cisco 3550 switches for our DMZs setup, we would like to utilise the Private VLAN (PVLAN) features in order to protect our individual server from any attack or any compromise servers. Can any body highlight some more on thi...

IOS version 12.0(15) APPNaverage number of links 300 per router (HSRP, 2 APPN routers)Synopsis: Rollout of XP to the desktop from NT. Average of 45 conversions per night. The procedure is to Remove the NT workstation From the Network, Install n...

Can i connect three bsc lines from one IBM3745 and tunnel them (bstun) through my ATM-WAN cloud to a destination router, where i want to connect the three bsc controllers.are there any experiences with stability of bstun connections?

We are considering the installation of a 16 port 10/100/1000BaseTX module in our core 6509s for some of our gig enabled servers. This raises some questions: At what point do you need to enable the x-bar with a SFC? In other words, what is the best...

I have devices attached to a Catalyst switch, and I wanted to find out which device is attached where by checking the IP address of a specific device attached to a port. The ARP tables don't show any devices. Anyone know a quick/dirty way to do thi...