Server Networking

Hi All,   Coudl yo uplease suggest the adpaters whcih is compatile with    HP Virtual Connect FlexFabric 10Gb/24-port Modules  and Cisco 3750-E swicth 

Hi,   We have 2 DCs one DC(DC1) has 4500 VSS as the Core and the other DC(DC2) has N9k switches as the core. Now in the N9K core I will be using HSRP however in 4500 VSS there is no HSRP required now if I extend the vlan between  DC1 and DC2 using AS...

I don't understand , whenever i start working on UCS Director my otv isn't AED capable. i've verified the mtu on core and correct it. But it isn't working...      Overlay interface Overlay1 VPN name : Overlay1 VPN state : UP Extended vlans : 100 105 ...

I read in vmware blog that in new version of vmware vsphere cisco nexus 1000v and VSG in not supported. is that correct? vmware link:https://kb.vmware.com/selfservice/microsites/search.dolanguage=en_US&cmd=displayKC&externalId=2149722   anyone has id...

Hello dears, I would like to solve my problem .... please advise if it is possible. I have some special blade solution .... Every node has 2x infiniband interface and not standard gb ethernet port is pressent ...    I need separate traffic without VL...

I am a bit confused and need some clarity.    In a leaf spine topo you want each leaf connnecting to each spine and not to each other.    If i have 1 rack with a pair of 93xx series switches (2 for redundancy), or any other switches for that matter, ...

Hello All, Can anyone help me designing part of L3 routing between two nexus 9504 core switches.We have build both core switches and vPC is configured between them. Now we required ospf routing or L3 routing between the core swtiches, is it recommend...

Hi all So I am running a simulation in VIRL where I have the following DC 1 2 x Cisco N9Ks DC2 2 x Cisco N9Ks and a layer 3 DCI between them (routed port on each opposing N9K running OSPF) - in this scenario (ie not trunked DCI) is it possible to ext...

I am checking the comparison page for N9500 100Gbps modules. They have dedicated line for ACI Leaf and ACI Spine (screenshot attached). What is the reason that none of the 100Gbps modules can be ACI Leaf and some can be ACI Spine while others cann't?...

Hello Everyone, Kindly I need help here, I’m trying to install SAS module in the UCS servers, so I need to check the compatibility of this part number (P/N :- G164P) with “Cisco UCSC-C220-M4 with Intel CPU v4 and Vmware ESXI 6.x”The details of the an...

On a Nexus 7K, I want to configure IP SLA ICMP Echo to track an IP across a fiber link and remove a route if the receive side doesn't respond to ping after x amount of time.  Is 'timeout' the appropriate parameter to use to accomplish my goal?  Let's...