Configure Windows on UCs c22 M3 drives are not showing

[Khurram Tariq]

hello all

i am configuring windows server 2008r2 on UCS c22 m3 , i have configured raid1 (default) virtual drive , drive is showing in BOOT order but when i install windows and it prompts to selct hard drive, there no drive are showing , do i need to install any driver for it? if yes then which version of driver i download, my CIMP version is 1.5(1k) kindly suggest me and help me in solving this issue.

[Khurram Tariq]

thanks kenperez for your prompt and valuable suggestions, i dont know what was the issue i make bootabel usb from different tool this time and configure the same driver and this time it installed on it, i dont know what was happened i did not change anything and driver installed,

thanks for your coordination

[Keny Perez]

Hello,

So, is your issue solved after you selected the folder I suggested? If yes, please remember to mark that answer as the solution as well, so future users can see you found the answer you were looking for...

-Kenny

[Khurram Tariq]

No correct driver was intel c600 for the mega raid but i have changed the way i was making my bootable USB for server 2008R2(used wintoflash software) and it worked.driver was correct as you told.

thanks for your help

[Khurram Tariq]

yes rated answer as well