11-02-2013 06:41 AM
I ran into a problem not being able to license FCoE on N7K-F132XP-15 module. I have the license file installed properly, but still getting "
ERROR: Cannot obtain license, line card is not supported". It seems the problem is with version of HW on this particular module 1.0. Anyone has experience with this ?
switch(config)# show module
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 32 10 Gbps Ethernet Module N7K-M132XP-12 ok
2 32 1/10 Gbps Ethernet Module N7K-F132XP-15 ok
5 0 Supervisor module-1X N7K-SUP1 active *
Mod Sw Hw
--- -------------- ------
1 6.0(4) 1.8
2 6.0(4) 1.0
5 6.0(4) 1.4
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 d0-d0-fd-f1-5d-00 to d0-d0-fd-f1-5d-24 JAF1429CJCR
2 f8-66-f2-e4-d5-4c to f8-66-f2-e4-d5-90 JAF1704BFTD
5 00-24-f7-1d-c3-08 to 00-24-f7-1d-c3-10 JAF1317BDBF
Mod Online Diag Status
--- ------------------
1 Pass
2 Pass
==================================================================================
switch(config)# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
MPLS_PKG No - Unused -
STORAGE-ENT No - Unused -
ENTERPRISE_PKG No - Unused -
FCOE-N7K-F132XP Yes 1 Unused 30 Jan 2014 -
ENHANCED_LAYER2_PKG No - Unused -
SCALABLE_SERVICES_PKG No - Unused -
TRANSPORT_SERVICES_PKG No - Unused -
LAN_ADVANCED_SERVICES_PKG Yes - Unused Never license missing
LAN_ENTERPRISE_SERVICES_PKG Yes - Unused Never license missing
--------------------------------------------------------------------------------
=======================================================================================
switch(config)# install feature-set fcoe
feature set is installed already(0x40aa0011)
switch(config)# li
license line
switch(config)# license fcoe module 2
ERROR: Cannot obtain license, line card is not supported
switch(config)#
Solved! Go to Solution.
11-04-2013 03:35 AM
Hello,
Can you please share the output of following commands
show version
attach module 2
show hardware internal dev-revision
and what happens when you try to use force option
switch(config)# license fcoe module 2 force
Padma
11-02-2013 03:52 PM
What happens when you try
feature fcoe
HTH
11-02-2013 04:01 PM
This is Nexus 7k, there is no such command "feature fcoe". I can install fcoe "install feature-set fcoe" without a problem, but to run fcoe I need to designate one of the linecards with "license fcoe module 2" command. This is where the problem happens. I know I am doing everything right; I have identical setup on another switch, but this throughs the ERROR. The only difference I see is in show verion output of the linecard. The working one is HW 1.1 the one I use is 1.0. However it is the same model of the card N7K-F132XP-15 and I don't see any mention in documentation about the hardware release differences.
11-04-2013 03:35 AM
Hello,
Can you please share the output of following commands
show version
attach module 2
show hardware internal dev-revision
and what happens when you try to use force option
switch(config)# license fcoe module 2 force
Padma
11-04-2013 09:13 AM
Padma, I think you solved the problem. The "license fcoe module 2 force" took affect (see output below). The "force" option is hidden, so I didn't make that guess on my own. I hope from here on the card should be able to handle FCoE configuration. If you know of any other pitfalls with this particular hardware revision, please share.
n7k# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 3.22.0
kickstart: version 6.0(4)
system: version 6.0(4)
BIOS compile time: 02/20/10
kickstart image file is: bootflash:///n7000-s1-kickstart.6.0.4.bin
kickstart compile time: 12/25/2020 12:00:00 [06/22/2012 19:26:16]
system image file is: bootflash:///n7000-s1-dk9.6.0.4.bin
system compile time: 6/6/2012 18:00:00 [06/22/2012 21:03:20]
Hardware
cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")
Intel(R) Xeon(R) CPU with 8245320 kB of memory.
Processor Board ID JAF1330AHKM
Device name: n7k
bootflash: 2030616 kB
slot0: 2075246 kB (expansion flash)
Kernel uptime is 0 day(s), 1 hour(s), 36 minute(s), 46 second(s)
Last reset
Reason: Unknown
System version: 6.0(4)
Service:
plugin
Core Plugin, Ethernet Plugin
CMP (Module 5) ok
CMP Software
CMP BIOS version: 02.01.05
CMP Image version: 5.1(1) [build 5.0(0.66)]
CMP BIOS compile time: 7/13/2008 19:44:27
CMP Image compile time: 11/29/2010 12:00:00
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
n7k# attach module 2
module-2# show hardware internal dev-version
-------------------------------------------------
Name InstanceNum Version
-------------------------------------------------
Orion Fwding Driver 1 3.0
Orion Fwding Driver 2 3.0
Orion Fwding Driver 3 3.0
Orion Fwding Driver 4 3.0
Orion Fwding Driver 5 3.0
Orion Fwding Driver 6 3.0
Orion Fwding Driver 7 3.0
Orion Fwding Driver 8 3.0
Orion Fwding Driver 9 3.0
Orion Fwding Driver 10 3.0
Orion Fwding Driver 11 3.0
Orion Fwding Driver 12 3.0
Orion Fwding Driver 13 3.0
Orion Fwding Driver 14 3.0
Orion Fwding Driver 15 3.0
Orion Fwding Driver 16 3.0
PHY 1 56778642.1291
PHY 2 56778642.1291
PHY 3 56778642.1291
PHY 4 56778642.1291
PHY 5 56778642.1291
PHY 6 56778642.1291
PHY 7 56778642.1291
PHY 8 56778642.1291
PHY 9 56778642.1291
PHY 10 56778642.1291
PHY 11 56778642.1291
PHY 12 56778642.1291
PHY 13 56778642.1291
PHY 14 56778642.1291
PHY 15 56778642.1291
PHY 16 56778642.1291
Santa-Cruz-Module 1 0.4
Santa-Cruz-Module 2 0.4
Falcon 1 2.0
IO FPGA 1 0.045
PM FPGA 1 1.001
BIOS version v1.10.17(04/25/11)
Alternate BIOS version v1.10.17(04/25/11)
module-2#
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
n7k(config)# license fcoe module 2
ERROR: Cannot obtain license, line card is not supported
n7k(config)# license fcoe module 2 force
n7k(config)# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
MPLS_PKG No - Unused -
STORAGE-ENT No - Unused Grace 119D 23H
ENTERPRISE_PKG No - Unused Grace 119D 22H
FCOE-N7K-F132XP No 0 Rsrved Grace 81D 3H
ENHANCED_LAYER2_PKG Yes - In use Never license missing
SCALABLE_SERVICES_PKG No - Unused -
TRANSPORT_SERVICES_PKG Yes - Unused Never license missing
LAN_ADVANCED_SERVICES_PKG Yes - In use Never license missing
LAN_ENTERPRISE_SERVICES_PKG Yes - Unused Never license missing
--------------------------------------------------------------------------------
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide